Contact Us

TEL:0595-22990366

E-mail:heyi-frank@heyitech.com

HEYI Building NO.63-1 Yu Shi Road, Economic and Technologic Development Zone, Quanzhou, Fujian, China

Home > Exhibition > Content
Outdoor Wireless Acousto-optic Siren
Apr 07, 2017

1.Brief Introduction

The Outdoor wireless acousto-optic siren adopts 8 bit MCU technology, built-in 48 LED lights, 2 wired zone Interfaces, 2 120dB buzzers and 1 built-in 12V/1.2A Lead-acid battery. The Outdoor wireless acousto-optic siren not only can connect with the alarm host via wireless transmission, but also can be used as an alarm host and a repeater. It is widely used in banks, shops and villas etc.

When the outdoor wireless acousto-optic siren works with wireless alarm host by wireless transmission, alarm host can input the outdoor wireless acousto-optic siren address, or directly learning with the outdoor wireless acousto-optic siren. The outdoor wireless acousto-optic siren’s tamper alarm, AC information, battery voltage information are all transmitted to the alarm host via wireless signal. Then the alarm host notifies the user about the alarm information via SMS, center and voice.The outdoor wireless acousto-optic siren also can indicate alarm host arm / disarm status.

Users can buy the relative remote controls and detectors according to their demand when the outdoor wireless acousto-optic siren is used as the alarm host. It can connect with these wireless accessories and become a powerful independent alarm system.

The Outdoor wireless acousto-optic siren can also be used as a repeater, which can increase the wireless launch distance effectively.

 

2. Main Features

Used as a repeater, it can transmit 32 wireless accessories.

3 colors of indicator lights flashing modes. ( Red/ Blue/ Red+Blue )

◆ Design for preventing the siren being removed maliciously .

◆ Acousto-optic notice when operating Arm /Disarm.

◆ Status reports including the alarm from siren itself, tamper alarm, alternating current information and  

  battery voltage.

◆ Support 8 remote controls, 32 detectors.

◆ Built-in 2 NC type wired zone interfaces. Zone No.1 for 24 hours defend and zone No.2 for burglar

  defend.

◆ Two optional ways to pair: wireless pair and inputting siren numbers to pair.

◆ Optional acousto-optic alarm notice when A/C is off.

◆ Optional light alarm notice on standby status.

120dB alarm sound, flashing lights, a strong deterrent.

 Built-in 12V/1.2A Lead-acid battery, up to 24 hours of sand-by time

◆ Built-in balance device, convenient to install in horizontal direction.

 

3. Interface definition

   Power adapter port, Wired zone No.2(burglar), Wired zone No.1(24h), Siren setting, Tamper switch, Battery interface, Atenna interface, Buzzer port, Power light, Setting button, Select/delete button, Code button.

3.1 Siren Setting

Report transfer

REP_ON: Reports of the wireless siren will be transferred to the panel.

REP_OFF: Reports of the wireless siren will not be transferred to the panel.

LED light

12L: 12 LED lights flashing 

24L: 24 LED lights flashing

AC power failure alarming

   ON: Alarm sound with light prompt when AC is off.

OFF: No alarm notice when AC is off.

 Types of alarm voice

1T: Only 1 voice when alarming

6T: 6 kinds of voice when alarming

Alarm time

   30S: 30 seconds of alarm sound.

3MIN: 3 minutes of alarm sound.

Light notice when standby status

LED_ON: Light alarm notice when siren is in standby status.

LED_OFF: No light hint when the siren is in standby status.

3.2 Power light

   Long ON: Alternating Current is normal.

   Light OFF: Battery-Powered

3.3 Working Mode

   Blue: The indicator light is blue.

   Red: The indicator light is red.

   Red+Blue: The indicator light is red+blue.

3.4 Status Lights

 ①Blue

   Light OFF: The Outdoor wireless acousto-optic siren/ the alarm host is at disarm or unknown status.

   Flashes once every three seconds: The Outdoor wireless acousto-optic siren/ the alarm host is at arm status.

   Fast Flashing: The Outdoor wireless acousto-optic siren/ the alarm host is alarming.

 ②Red

   Light OFF: The Outdoor wireless acousto-optic siren/ the alarm host is at disarm or unknown status.

   Flashes once every three seconds: The Outdoor wireless acousto-optic siren/ the alarm host is at arm status.

   Fast Flashing: The Outdoor wireless acousto-optic siren/ the alarm host is alarming.

 ③Red+Blue

   Blue lights fast flashes 4 times every second: The Outdoor wireless acousto-optic siren/ the alarm host is at disarm or  

   unknown status.

   Red lights fast flashes 4 times every second: The Outdoor wireless acousto-optic siren/ the alarm host is at arm status.

   Alternately flashes blue and red lights: The Outdoor wireless acousto-optic siren/ the alarm host is alarming.

3.5 Transmitting Mode

   ON: Turn on transmitting mode

   OFF: Turn off transmitting mode

 

Note: Checking AC power outages need to take 20 seconds of checking time.

4. Technical parameter

Size specification: 320mm * 213mm * 94mm * (length * width * thickness)

Working voltage:  DC 15V

Battery: 12V/1.2Ah

Standby current: < 35mA/15V

Alarm current: < 400mA/15V

Siren alarm sound: >120dB

Use environment: working temperature -20℃~ +55℃ relative humidity 40 ~ 80%


Previous: Door sensor door contact

Next: What Is a Smart Alarm System?