Contact Us

TEL:0595-22990366

E-mail:heyi-frank@heyitech.com

HEYI Building NO.63-1 Yu Shi Road, Economic and Technologic Development Zone, Quanzhou, Fujian, China

Home > Exhibition > Content
Wireless Pet-immunity PIR Detector
Mar 29, 2017

The wireless pet-immunity PIR detector adopts double infrared sensor technology, which can avoid false alarm caused by pet and improve stability greatly.


Main Features

◆Pet immunity with the signal from the double sensor.
◆Improve the stability greatly based on analyzing the signal of
dual symmetrical element µprocessor.
◆Automatic temperature compensation which can adapt the
temperature change of the environment.
◆Anti-white light function.
◆Anti-magnetic interference with counting pulse sensitivity.
◆Support low voltage alarm detection function


Technology Parameter

Working
Voltage
DC V ( pieces of #
battery)
3 2 5
Installation
Height
about 2m
Working
Curren
≤140uA Detective
Angle
110℃
Time of Alarm
Blocking
12mDetective
Distance
60S
Pet-immunity433.92MHzW i r e l e s s
frequency
35kg
Working
Temperature
300mWireless
distance
-10℃~+50
Wall/Ceiling
mounted
Installation
Mode
130mm*64mm*43mmSize: L/W/H


Usage of the product

1) ON/OFF: Setting sensitivity of the detector. 1P is Monopulse mode (1, 2): This mode is used in general environment
2P is Double-pulse mode: With more anti-jamming ability, this mode is used in the poor environment. The default state
is 2P.

2) ON/OFF: Set the detective way of PIR.SAVING is for energy saving: If the people enter the detective area and keep
moving continuously. The infrared detector sends one signal at first trigger only. The infrared detector won't send new
signal while trigger after 10 seconds immovability.NORMAL is for energy normal: when there is trigger at one time, the
sensor will block itself for 10 seconds. The sensor doesn't make effect by PIR signal in the 10 seconds. The default setting is NORMAL.

3) ON/OFF: LED ON/OFF selection indicates the status when the system alarms. LED (ON/OFF) does not affect the normal running of the detector.


Attention
1) After changing the setting of alarm output mode, or sensitivity of the detector, user shall restart the detector to activate the settings.
2After accomplishment, please put two pieces of 5# 2.batteries into the batteries slotting. When the 
indicator is flashing, the detector can start to work.
3) Turn on the power. After s of alarm blocking time, the indicator is off. The detector begins to detect.
4) User shall move horizontally at 6m distance to trigger the detector for testing.


Previous: DIY Home Security

Next: What does the security system include?